
Engineering & simulation
Simulated for your parts before anything is built.
Every TripleHard® line or conversion is simulated and engineered for the customer's parts before it is built. Savroc designs it with you and commissions it in your plant.
How a project runs
We design it with you. We stay until it runs.
-
1
Targets and starting point
- Your parts and specifications
- Volumes and your current process
-
2
Simulation for your parts
- The coating modelled on your parts
- From your drawings
-
3
Design and targets
- Line concept or conversion plan
- Targets agreed in writing
-
4
Build or convert
- A new line from a qualified equipment partner
- Or your existing line, converted to Savroc's conversion plan
-
5
Commissioning in your plant
- Process started up on site
- Operators trained
- Results verified on your parts against the agreed targets
-
6
Production and support
- Process support
- Optimisation, new applications
Simulation before deployment
Modelled for your parts before anything is built.
Every project is modelled on the customer's parts before equipment is ordered, whatever the coating work: an open-tank line being converted or a new continuous line. Each line is engineered for the customer's parts before it is built, and the coating results are verified on those parts against the agreed targets during commissioning. A design change is a new run, not a new prototype, so variants are compared in hours.
Deliverables
What a project produces, and who produces it.
| Deliverable | Content | Provided by |
|---|---|---|
| Simulation report | The coating and the line modelled on the customer's parts, with the design answers for the line or the conversion. | Savroc |
| Line concept or conversion plan | Process steps, configuration, layout principles; for a conversion, what changes in the existing line | Savroc |
| Acceptance criteria | The targets the customer's parts must meet, agreed in writing before the build | Savroc with you |
| Line equipment | Mechanical design, fabrication, installation of a new continuous line | Qualified equipment partner |
| Commissioning | Start-up on site, operator training and qualification documentation | Savroc |
Savroc does not offer contract coating. TripleHard® is already tested and in industrial use, so a project starts from the simulation of your parts; samples are coated only on special request.
Engineering questions
What does Savroc need to start a simulation?
Part drawings or a diameter and length range, the specifications the parts must meet, the target annual volume and coating thickness, and for a new line the plant: the floor area and height available, power and water supply, and ventilation.
Can simulation images be shared?
Simulation results are customer-specific and shared only with that customer, under NDA.
Does Savroc build the line?
No. Savroc owns and licenses the technology, designs the process and the line concept with the customer and commissions the process in the customer's plant. A new continuous line is built by a qualified equipment partner to Savroc's process design, or the customer's existing line is converted.

See it for yourself
The line runs in Kuopio. Come and watch it coat a rod.
Bring your drawings and the targets your parts must meet. Savroc's engineers show you the line, the test data and what a project in your plant would look like. No commitment. The line is open for visits.
Savroc sales@savroc.com