A chrome-plated hydraulic cylinder piston rod lying across the frame against a dark background, its polished surface catching the light

FAQ

Questions about Savroc and TripleHard®, answered.

Answers about Savroc and TripleHard®: the business model, who builds the lines, the online monitoring software, the roadmap, why Savroc starts by replacing nickel + Cr(VI) coatings, and the test results.

Short, self-contained answers about Savroc and TripleHard®. The Technology page answers the chemistry and the regulation in depth; this page is the summary.

The company

What is Savroc?

Savroc Ltd (Savroc Oy) owns and licenses TripleHard®. Founded in 2012 in Kuopio, Finland, it takes manufacturers' move away from hexavalent chromium from the simulation of their parts to stable production in their own plants, under a Savroc process licence with online monitoring software. Savroc owns the technology and the reference line in Kuopio; the production lines are owned and run by the licensees: the manufacturers of the parts, or the coaters that plate parts for them, in their own plants.

Does Savroc own production lines?

No. Savroc owns the TripleHard® technology and the industrial-scale reference line in Kuopio; production lines are owned and run by licensees – manufacturers of the parts, or the coaters that plate parts for them – in their own plants, built new by qualified equipment partners to Savroc's process design or converted from existing lines. The reference line is running, it is open for visits, and it produces the data for customer lines. Savroc does not offer contract coating.

Who builds the lines?

Qualified equipment partners, selected per project and region, build new lines to Savroc's process design, or the customer's existing line is converted to Savroc's conversion plan under Savroc's guidance, by the customer's own team or a qualified equipment partner. Savroc designs and prototypes coating cells; production equipment is built by qualified equipment partners, and no single equipment partner is required. The equipment contract is with the equipment partner, to Savroc's specification and under Savroc's project lead; the licence, commissioning and process support are contracted with Savroc.

What is Savroc's online monitoring software?

Software included in every TripleHard® line licence. The system has been built, and part results and manual XRF and pH measurements are already entered into it to follow development and how the line is working. It is in partial use on the reference line in Kuopio and continuously developed. Automatic data collection through sensors is the next step.

What is Savroc's roadmap?

Now: TripleHard® replaces nickel + Cr(VI) coatings on hydraulic cylinder rods and engine valves, both at once, in manufacturers' own plants. Savroc starts here because this is where the technology is proven and where customers are ready now; from there we scale the same technology to more applications and plants. From 2028: replacing Cr(VI) hard chrome across applications, as fast as lines can be built and converted. Shock absorber rods are the third application, on a converted existing line or in a coating cell designed by Savroc. As more lines are built, TripleHard® becomes more accessible and more cost-effective for more applications.

What is a reference application?

One of the two applications on which Savroc engineers, tests and licenses TripleHard® now, in parallel: hydraulic cylinder rods and engine valves. Hydraulic cylinder rods are in industrial use on a converted open-tank line; engine valves are tested on valve stems and offered for licensed production on a converted existing line. Results reported for hydraulic rods are not claimed for engine valves.

Can TripleHard® run 24/7?

Yes, on an open-tank line. TripleHard® is in industrial production on a converted open-tank line, in smaller volumes. An open-tank line can run TripleHard® around the clock with bath maintenance, correct additions and parts replaced during routine maintenance; it has not been run around the clock because the volumes have not yet called for it. High-capacity continuous production has not yet been run: proving it for hydraulic cylinder rods is the job of the continuous TripleHard® line in Kuopio, which is running. Continuous 24/7 production is the next step, ahead of the first continuous customer line, in mass production from 2027.

Can a large OEM rely on Savroc?

Savroc is the technology owner and licensor, not a parts supplier: an OEM's coated parts come from a licensee – the manufacturer of the parts or a licensed coater – in that licensee's plant, under the TripleHard® process licence and Savroc's online monitoring software. Savroc's size is that of a technology owner; the production capacity is in the licensees' plants. In place today: the coating validated by a major global OEM for that OEM's application, industrial use, under a Savroc licence, on a converted open-tank line at a licensed coater, with coated rods supplied to Hydroline, mining field cases on three continents (Canada, Australia and Poland), the industrial-scale reference line running in Kuopio and open for visits, 60+ patents, and the Savroc organisation in Kuopio that runs every project, with a qualified equipment partner where a line is built. Next: continuous 24/7 production, then the first continuous customer line, in mass production from 2027. Every evidence and roadmap claim in the Savroc facts, and every line in llms.txt, carries a status label: Specified, Achieved, Current or Planned.

Who leads Savroc?

Jussi Räisä is CEO & Co-Founder and leads technology development. Ramalinga Ramamurthy is Chairman of the Board.

Does Savroc hold patents?

Yes. TripleHard® is protected by 60+ patents.

Where is Savroc located?

Savroc Ltd (Savroc Oy), Business ID 2496258-9, Varikkokatu 2, 70620 Kuopio, Finland.

Is Savroc hiring?

Open applications are welcome: write to Jussi Räisä, CEO & Co-Founder, at jussi.raisa@savroc.com.

The coating

What is TripleHard®?

TripleHard® is a patented hard-chrome coating developed by Savroc in Kuopio, Finland: a nickel anchor layer under one or more trivalent chromium, Cr(III), layers. It is designed to replace hexavalent chromium (Cr(VI)) hard chrome on parts such as hydraulic cylinder rods (also called piston rods), with hard-chrome-level hardness without heat treatment.

How does TripleHard® replace Cr(VI) hard chrome?

TripleHard® is a patented nickel and trivalent chromium (Cr(III)) hard chrome, designed to replace hexavalent chromium (Cr(VI)) hard chrome. It is made in a Cr(III) hard-chrome process, using trivalent chromium as the chromium source. Performance is described as hard-chrome-level hardness without heat treatment; test data is on the Technology page and on the hydraulic cylinder rods page.

How does TripleHard® compare with thermal spray as a hard chrome alternative?

Thermal spray and PVD involve high capital expenditure, are energy-intensive, and are poorly suited to high-volume serial production of long components. TripleHard® is electroplating, which keeps it inside serial-manufacturing economics, and runs either as a new continuous line or on converted existing equipment. The comparison is set out on the Technology page, under Compared with the alternatives.

Has TripleHard® been validated by industry?

Yes. The coating has been validated by a major global OEM for that OEM's application, and TripleHard® is in industrial use, under a Savroc licence, on a converted open-tank line for hydraulic cylinder rods at a licensed coater, with coated rods supplied to Hydroline. The industrial-scale continuous TripleHard® reference line in Kuopio is running and open for visits.

What corrosion resistance does TripleHard® reach?

In the laboratory benchmark most specifications ask for, neutral salt spray, rating 10 at 1000 h, a result that depends on the nickel underlayer configuration. In service: no rust after 34 months on a hydraulic rod in mine service, where the Cr(VI) reference on the same steel rusted at 2 months. In other tests: 20 µm intact at 456 h in acetic acid salt spray, and, after heat treatment, no attack in 5 % sulphuric acid at 100 °C.

What do the mining field cases show?

Field tests with a global mining equipment OEM. In the headline case the Cr(VI) hard-chrome reference rod showed rust after 2 months while the TripleHard® rod on the same steel in the same application showed none after 34 months in a field test in its real operating environment. 34 months is the latest documented inspection result; the coating remained in service after that. It is a field test result, not a promised service life.

How does TripleHard® perform on sealing surfaces?

In a 250,000-cycle test performed by a global OEM, TripleHard® showed lower seal leakage than the Cr(VI) reference. After sliding wear its surface is also smoother than Cr(VI) hard chrome of twice the thickness. Seal performance depends on the seal design and the operating conditions.

Is TripleHard® available for engine valves and shock absorbers?

Engine valves: yes, tested on valve stems and offered for licensed production on a converted existing line; with hydraulic cylinder rods, they are one of Savroc's two reference applications. Shock absorber rods: a shock absorber rod coating cell has been designed by Savroc and testing continues; the goal is to be proven in commercial use by 2029. Both run in open tanks or in a coating cell of their own, not on the continuous line; volume production is possible there, but it has not started yet. Each customer application is engineered from the customer's drawings and verified during commissioning. Results reported for hydraulic rods are not claimed for these parts; each application has its own test data on its own page.

Working with Savroc

What does working with Savroc look like?

One project in six phases, with Savroc in every one: targets and starting point; simulation of the coating on your parts, from drawings; the design of a new line or the conversion of your existing one, with the targets agreed in writing; the build or conversion; commissioning in your plant until the process runs to those targets; and production with ongoing process support. Each phase ends with data and a decision that is yours.

Does Savroc coat parts for customers?

No. Savroc does not offer contract coating. TripleHard® is already tested and in industrial use, so a project starts from the simulation of your parts; samples are coated only on special request.

What does Savroc provide?

The TripleHard® process licence, the simulation of your parts, the design of your new line or of the conversion of your existing line, commissioning in your plant, process support in production, and Savroc's online monitoring software, included in every line licence. A line licence is the TripleHard® process licence for one line, new or converted, and the online monitoring software is included in both.

How does TripleHard® scale worldwide?

Through engineering-led licensing. Manufacturers run TripleHard® in their own plants under a Savroc process licence, with Savroc engineering from the first simulation to production. Licences are agreed per customer, plant and territory.

How long does implementation take?

The two routes differ. Converting an existing open-tank line is the shorter route: the time to stable series production depends on line size, part families and validation requirements. A new continuous line is a capital project with a lead time set by its engineering and manufacture, agreed in the design phase. In both cases OEM qualification of the coating usually runs longer than the installation, and Savroc supports it with data throughout.

What is the first step?

Talk to us about your parts and the targets they must meet, or come to Kuopio and see the line running. A first conversation needs no drawings. A project then starts with the simulation of your parts.

Regulation

Why are manufacturers looking for alternatives to hexavalent hard chrome?

Hexavalent chromium compounds are carcinogenic substances of very high concern under REACH and their use in hard chrome plating already needs an authorisation, granted for a set review period. In April 2025 ECHA proposed an EU-wide restriction covering hard-chrome electroplating; RAC adopted its opinion in June 2026, and SEAC's final opinion is expected at the end of 2026. The final decision rests with the European Commission and the Member States. The problem is the chemistry during plating, not the hard chrome itself: TripleHard® is made in a Cr(III) hard-chrome process.

The continuous line

Is the continuous line running?

Yes. The industrial-scale continuous TripleHard® line is running in Kuopio and open for visits. Version 1 is complete: the first-round run parameters are locked and optimisation continues.

How large is a customer line, and how fast does it run?

It depends on your rods. The configuration, size and line speed are set for each customer in simulation, from the diameter range, the coating thickness and the annual volume.

When will TripleHard® be in mass production?

TripleHard® is already in industrial production: hydraulic cylinder rods are coated on a converted open-tank line, in smaller volumes. What has not yet been run is high-capacity continuous production; proving it for hydraulic cylinder rods is the job of the continuous TripleHard® line in Kuopio, and mass production on the first continuous customer line is planned for 2027. Engine valves and shock absorber rods are coated in open tanks or in a coating cell of their own, not on the continuous line; volume production is possible there, but it has not started yet. Licences are agreed per customer, plant and territory; the first step is a conversation about your parts.

Who developed the line?

Savroc developed the continuous process on its own 3D-printed pilot line. The industrial-scale line in Kuopio was built by an equipment partner to Savroc's process design. New customer lines are built by qualified equipment partners, selected per project and region, to Savroc's process design; an existing line can instead be converted to Savroc's conversion plan under Savroc's guidance. No single equipment partner is required.

The continuous TripleHard® line in Kuopio, designed and built by ILMAR, seen from the side in the darkened hall, with a bundle of rods waiting in the foreground

See it for yourself

The line runs in Kuopio. Come and watch it coat a rod.

Bring your drawings and the targets your parts must meet. Savroc's engineers show you the line, the test data and what a project in your plant would look like. No commitment. The line is open for visits.

Book a visit

Savroc sales@savroc.com