The continuous TripleHard® line is running in Kuopio
The industrial-scale continuous TripleHard® line is running in Kuopio. Version 1 is complete, with mass production on the first continuous customer line planned for 2027.
From a 3D-printed pilot to an industrial line in one year
About a year ago, Savroc started developing the continuous TripleHard® process on a pilot line it designed itself and built from 3D-printed parts. More than 50 versions were tested over months of near-daily experiments. The coating itself was already proven: TripleHard® is in industrial use, under a Savroc licence, on a converted open-tank line for hydraulic cylinder rods at a licensed coater, with coated rods supplied to Hydroline. The question was how to run the complete process continuously, at industrial scale.
In February 2026 an equipment partner visited Kuopio, saw the small-scale models and agreed to build a full-size line. The line arrived in June. On 8–9 August the partner completed the installation, and the line ran for the first time the same day.
The whole process, in one pass
The line takes a rod through every stage without stopping: surface preparation, etching, nickel deposition and the TripleHard® Cr(III) layers. The result is TripleHard®: a nickel anchor layer under trivalent chromium, with hard-chrome-level hardness and no post-plating heat treatment. The line is fully enclosed, so the baths are not open to the hall.
The continuous TripleHard® line in Kuopio is running, and Version 1 is complete. Continuous 24/7 production is the next step, and then we take TripleHard® into mass production on the first continuous customer line, starting in 2027.
— Jussi Räisä, CEO & Co-Founder
Savroc’s online monitoring software is built to track the process in real time, flag deviations and keep a record of every part. It is included in every line licence, in partial use on the reference line in Kuopio and continuously developed.
What comes next
Savroc leads every project, from the simulation of the customer’s parts to commissioning in the customer’s plant. Customer lines are built by qualified equipment partners to Savroc’s process design, and Savroc licenses the TripleHard® process.
Come and see it run
The line runs in Kuopio, and the first conversation is always with Savroc. To see a rod coated, contact Savroc at sales@savroc.com, or book a visit.